Motorcycle Alarm System   1. The transmitter is ineffective to control the system. 1). Check if the wire is properly connected. 2). The fuse of the ECU is burnt. 3). Check if the transmitter matches the ECU. Top>>   2. The continuous chirps of the siren can't be stopped by the transmitter after the installation of the ECU. 1). Check if the system is in mute armed mode. 2). Check if the plug is improperly inserted. 3). Check if the transmitter matches the ECU. Top>>   3. When the motorcycle is parked on roadside, there is false alarm by heavy vehicles passing. 1). The sensitivity of the sensors is too high, please reduce the level of the sensitivity. Top>>   4. The siren does not chirp when the alarm system is triggered. 1). The siren is damaged. 2). Low voltage of motorcycle battery. Top>>   <<Back